Posted on

Electrician for Power Point Repairs: Power Points not working correctly, fault finding, wiring repairs, power point replacement

Electrical components like power points and wiring don’t last forever. Over time the power point fitting itself may become faulty and require repair or replacement. In other cases the fault may be traced to no power arriving to that particular power point.

Power Point Fault Finding
An initial diagnostic and testing process will help to determine the cause of the fault and the action required to resolve the issue. An electrician will run through a series of checks to ensure than there is a stable power supply to the power point. If the initial diagnostic determines that there is power supply issue it could be the wiring, a fuse, a circuit breaker, the switchboard or something else within the specific electrical circuit.

Power Point Repairs
Replacement is normally a better option than repair for power point fittings. However, in some cases, where safety is not compromised, repair may be a fast and affordable option.

Power Point Replacement
When the fault is traced to the power point fitting, and it is not able to be repaired cost effectively or safely, replacement is the best option. Power points come in a range of sizes, specifications and colours. For more information on details regarding larger installation projects and upgrades for power points, sockets and outlets visit our specific webpage regarding this service offering.

Our Auckland wide team of registered master electricians are experienced with power point repairs and installations for residential property and commercial buildings.

Need an Electrician for your Power Point Repair?

Hall Electrical can assist you with your electrical fault, repair and installation. Call us on 09 379 9198

Posted on

Electrician for Interior Light Repairs: Downlights, Ceiling Lights, Wall Lights, Spot Lights, Hall Lights, Stair Lights, Bathroom Lights, Kitchen Lights, Halogen Lights, LED Lights

When your lights are not working correctly (or at all), and it’s not the bulb, you’ll need an electrician to test the electrical circuit and repair the fault. Common faults with interior lights include faulty light fittings and components. These can often be resolved by simply replacing part or all of the light fitting. Other issues may require more extensive repair and replacement.

The age of the components within the electrical circuit may also be a factor in identifying the fault. Within both residential properties and commercial buildings the age of the electrical wiring, switchboard, light fittings and fixtures all have an impact on the performance of lighting. It could be more cost effective and safer to replace a number of the components to ensure faultless operation of interior lights. Common interior light repairs include;

Downlight Repairs
Downlight repairs have become a rather common need in many homes and businesses. Often the fault occurs simply because of a downlight fitting failure. When building or renovation work is originally undertaken, average quality downlights are sometimes installed to keep the cost of the entire project down. Replacing with new fittings can quickly resolve and repair the issue. In fact, new downlight regulations came into effect in May 2012 which help improve the standard of downlight installations.

Spot Light Repairs
Kitchens are a common location for spot lights. Both wall and ceiling mounted spot lights come as single, double, triple and quad fittings. When the fitting has multiple spot lights, it is often easilier to see if it is the fitting or power supply causing the issue. If replacement is the best solution, there is the option to replace with newer style halogen spot lights.

Ceiling & Wall Light Repairs
Ceiling & wall lights depend on both the age of the fitting and the purpose of the light. Regardless of the light fitting (claw, fluorescent, surface or hanging) the process starts with testing the electrical circuit.

Our Auckland wide team of registered master electricians are experienced with interior lighting repairs and installations for residential property and commercial buildings.

Need an Electrician for your Interior Light Repair?

Hall Electrical can assist you with your electrical fault, repair and installation. Call us on 09 379 9198

Posted on

Electrician for Stove Repairs: Stoves, Ovens, Cooktops, Elements, Lights, Timer & Wiring

Stoves with an electrical fault can make cooking a frustrating experience. Stoves differ greatly in age, make, style and functionality. However, the faults people experience are quite common and often require an electrician to test the power supply, connection, switch, element, circuit breaker, fuse and operation.

Common Stove Faults

      • One element doesn’t work at all
      • All elements not going
      • Element not heating up
      • Oven isn’t heating up
      • Oven light not working
      • Oven timer not working
      • Stove clock isn’t working
      • Stove power outlet/socket not working
      • Oven temperature incorrect

      Stoves are found in the home, rental property, business or workshop. Depending on your situation your requirements may be quite different to other peoples. Differing requirements demand a flexible approach to Stove repairs and servicing. This is where a team of electricians with vast experience in stoves repair, servicing, replacement and installation can help you.

Common Stove Brands we Repair

      • Fisher & Paykel
      • Simpson
      • ATLAS
      • LG
      • AEG
      • Westinghouse
      • Delonghi
      • Parmco
      • Indesit
      • All other brands…

Sometimes it is uneconomic to repair a stove. Furthermore, at times stoves simply can’t be repaired. When this is the case two replacement options present themselves; a brand new unit or a reconditioned unit. For people wanting an affordable option, a reconditioned unit can be an excellent choice as they often also come with a warranty. Those wanted the extra piece of mind of longer warranty terms, a brand new stove many be a better option. Stoves are wired to the power supply, so either option will require a registered electrician to install the stove.

Our Auckland wide team of registered master electricians are experienced with repairs and servicing a wide range of whiteware appliances; stoves, ovens and stove top elements.

Need an Electrician for your Stove Repair Requirements?

Hall Electrical can assist you with your electrical fault, repair and installation. Call us on 09 379 9198

Posted on

RightLight is a programme championed by the NZ Energy Efficiency and Conservation Authority (EECA). The initiative is designed to help people learn about efficient lighting.

The website www.rightlight.co.nz provides lighting efficiency tips for the home and business. The site contains information on the following areas:

Home Environments: How to Save Money, Why Change, Choosing the Right Light

Choosing the right energy efficient light will become an easier task with knowledge the website provides in these areas;

    • Replacing existing bulbs; how to choose, bulbs & fittings, what watt?, which white?, where to buy, case study
    • Types of bulbs; compact fluorescent lamps, halogen spotlights, new generation halogen globe, linear fluorescent tubes, light emitting diodes, specialist halogen bulbs
    • Building or Renovating; design tips, virtual designer, room by room, lighting control systems, style gallery

Business Environments: Office, Industrial, Retail, Education

Each business environment has specific considerations in the following areas;

  • The right light level
  • Types of light
  • Lighting controls
  • Things you can do
  • Next steps

The Rightlight website has so much information so people might find it a little overwhelming. If less is more, then go straight for the quick tips page if you’re interested in business environments. If your focused on the home then head to the resources section tips page. Here are a few selected tips from the website you might find useful;

Quick Efficient Lighting Tips for Business

  • Install occupancy sensors in office and car parks
  • Use table lamps or task lighting for desks/work areas vs entire room lighting
  • Install day light sensors to dim lights when not required in full

Quick Efficient Lighting Tips for the Home

  • Turn lights off (the simplest way)
  • Use CFLs (compact fluorescent lamp)
  • Light-coloured walls
  • Task specific lights (one solution doesn’t work in all areas)
  • Low watt lamps in bedroom
  • Additional conveniently located light switches
  • Outdoor security lights on sensors

Need an Electrician for your Efficient Lighting Requirements?

Hall Electrical can assist you with your electrical repair, faults, design, installation and maintenance. Call us on 09 379 9198

Posted on

Electrician for Hot Water Cylinder Repairs: Wiring, Elements & Thermostats

Many of the issues to do with hot water cylinder faults are typically a plumbers domain of expertise. However, electrical power and (re)wiring are of course an Electricians. Common hot water faults are;

  • No hot water at all
  • Water is too hot, or too cold
  • Noisy cylinder

Repairing your hot water cylinder will always be a priority. If it’s your own home you’ll want to enjoy trouble free and predicable hot water. If it’s an investment property you’ll want to resolve the issue for your tenants asap to keep them happy, and ensure you protect your investment by getting the hot water cylinder and system checked out. Common repair services include;

  • Power supply to cylinder check
  • Cylinder wiring & connectivity check
  • Rewiring
  • Element replacement
  • Thermostat replacement

However, not all hot water cylinders can be repaired. Eventually time can take its toll and a replacement unit will be required. When a new hot water cylinder is installed a registered electrician must wire up the cylinder to the power supply

Need an Electrician for your Hot Water Cylinder Repair or Replacement?

Hall Electrical can assist you with your electrical repair call us on 09 379 9198

Posted on

WISHBONE O’Connell St Auckland Central
New Restaurant (Shop Fit-Out)

The Electrical Brief:
Electrical Services & Structured Cabling Services

Electrical Features:

  • Electrical Services – Distribution, Power and Lighting
    • Distribution board relocation and component installation throughout
    • Power cabling and outlet installation throughout
    • Lighting cabling and fitting installation throughout
  • Structured Cabling Services
    • Cat6 cabling installed throughout
    • All data outlets installed
Posted on

POKE BAR Sylvia Park
Shop Fit-Out

The Electrical Brief:
Electrical Services, Structured Cabling, CCTV

Electrical Features:

  • Electrical Services – Power and Lighting
    • Power cabling and outlet installation throughout
    • Lighting cabling and LED fitting installation throughout
    • Bonding/Earthing installation as required
  • Structured Cabling Services
    • Cat6 cabling installed throughout
    • All data outlets installed throughout
    • Server rack and patch panel installed
  • Audio Visual
    • Power cabling and outlets installed as required for AV
    • Data cabling and outlets installed as required for AV
    • HDMI cabling installed as required for AV
  • Security/CCTV
    • CCTV cabling and cameras installed as required for CCTV
    • CCTV POE Network Video Recorder (NVR) and Monitor installed as required for CCTV
Posted on

RIVERSIDE DENTAL Warkworth
Dental Fit-Out

The Electrical Brief:
Electrical Services & Structured Cabling

Electrical Features:

  • Electrical Services – Power and Lighting
    • Power cabling and outlet installation throughout
    • Lighting cabling and LED fitting installation throughout
    • RCD installation for surgeries
    • Bonding/Earthing installation as required
  • Structured Cabling Services
    • Cat6 cabling installed throughout
    • All data outlets installed throughout
    • Patch panel installed
    • Phone cabling and outlets installed
  • Audio Visual
    • Power cabling and outlets installed as required for AV
    • Data cabling and outlets installed as required for AV
Posted on

BIRDIES Sylvia Park Auckland
New Restaurant (Shop Fit-Out)

The Electrical Brief:
Electrical Services, Structured Cabling, Access Control & Security Cabling, Project Management for Audio Visual

Electrical Features:

  • Electrical Services – Distribution, Power and Lighting
    • Subdistribution-board and controls-board installation
    • Power cabling and outlet installation throughout
    • Lighting cabling and fitting installation throughout
  • Structured Cabling Services
    • Cat6, Cat6A & Cat7 cabling installed throughout
    • All data outlets installed
    • Multiple communications cabinets, patch panels, voice panels, cable management panels and backbone cabling installed throughout
  • Access Control & Security Services
    • Motion detection cabling installed throughout (fitting installation, commissioning by others)
    • Access Control cabling installed throughout (fitting installation, commissioning by others)
  • Audio Visual Services – Project Management
    • Power cabling and outlets installed throughout for AV
    • Data cabling and outlets installed throughout for AV
    • Design, fitting installation, commissioning all by specialist partner
Posted on

Operations Manager: Dave Morrison
With the rapid growth Hall Electrical has achieved in the last two years the need arose for someone to help Phil with the day to day running of the company. Dave Morrison, who has been with Hall electrical 17 years, has now been appointed to the new position of operations manager freeing up Phil’s time to further promote and grow the company. Good luck in your new role Dave.

New Team Member: Mark Tabrum
In early May Mark joined the team specialising in repairs for our very special commercial and domestic clients. Previously Mark had installed home ventilation systems until he got the passion to further his studies and become a qualified sparky. Before joining us Mark had been in full time study to complete his training.

Mark loves his sport coaching 3rd grade rugby league for the Howick Club during the week and playing 20/20 cricket on a Monday night. He has also recently rejoined the Howick Golf Club hoping to get back to the 11 handicap he had as a 19 year old.

New Apprentice: Ben Hepburn
With two of our apprentices, Johnny and Cole, nearly out of their apprenticeships it was time for Hall Electrical to look for more “boys” to train. Ben started with us in early August on a trial run and has quickly adapted into his new role.

Nicknamed “Fish’ because he is the new fish in a big pond his early morning chores include emptying the rubbish bins and getting the boss a coffee. With a bit more training he will be promoted to the vacuuming. Ben’s interests include soccer, softball and water polo.